Oil, rust and green stains lifted from pavers
Paver Stain Removal in St. Augustine, FL
Call (904) 664-5908 for a free stain removal estimate on your driveway, patio or pool deck.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Who removes stains from pavers in St. Augustine, and when will they answer?
Stained pavers at any St. Augustine, FL address can be treated by a local contractor, and an answer reaches you within 1 business day, usually a lot sooner. The estimate is free, and you owe nothing for asking. To describe a stain, call (904) 664-5908.
A stain is a clue as much as a blemish. Orange streaks, black spots and green film each point to a different cause, and each needs its own cleaner, which means a one size spray rarely finishes the job. Tell the contractor where the stain is and what you think made it when you ask for a free estimate.
Where does paver stain removal cover around St. Augustine?
Driveways, lanais and walkways in St. Augustine and every community below can be quoted, and each town has its own page with local notes. If your street is missing, call (904) 664-5908 and ask.
Which stains on pavers can be treated?
Four kinds come up most. Each has a different cause, so the cleaner changes too. To match a stain to its treatment, call (904) 664-5908.
Oil and grease
A St. Augustine installer lists oil, grease and automotive fluids on driveways and garages. Prosoco says oil soaks into porous pavers and can darken more after rinsing, so a degreaser is used and not a general cleaner.
Rust
Venture Paver Sealing ties rust to metal furniture, garden tools or iron-rich hard water. Prosoco says the source should be fixed first, or the stain returns.
Green, black and leaf marks
Prosoco groups leaves, algae, moss and mildew together and says roots and growth between pavers come out before cleaning. Damp, shaded spots build up again soonest.
White film
Efflorescence is salts coming to the surface as moisture dries. Prosoco says it is not simple dirt and can return if moisture keeps moving.
Why do my pavers in St. Augustine get orange rust streaks?
Check the sprinklers first. Florida-Friendly Landscaping at the University of Florida says most Florida well water is high in iron and leaves rust deposits on anything it touches, and that unsightly stains often show up when high-iron water is used for irrigation. A streak that lines up with a spray head points that way. To describe where yours sits, call (904) 664-5908.
The same page suggests a water test through the County Extension Service before choosing a fix. Cleaning without fixing the source means the stain returns when the sprinklers run, so a contractor will usually ask where the water comes from. Furniture and tools also leave rust, so mention any metal that sits on the pavers when you ask for a free estimate.
What is the stain removal process, and will pressure washing alone work?
Not safely, and not always. Prosoco says too much pressure can displace joint sand, damage the surface and push water where it should not go, and Belgard says the spray can expose the aggregate beneath the paver's surface. A contractor picks the pressure for the paver and puts sand back after. To ask about pressure on yours, call (904) 664-5908.
Is acid safe on my pavers?
It depends on what the pavers are. Prosoco says acidic cleaners suit some pavers but not natural stone, sealed pavers or surfaces with unknown coatings, and that a small hidden spot should be tested first. Rust removers often use acid, so nearby plants and metal need protection. Ask which product a contractor plans to use, then ask for a free estimate.
Belgard adds two rules for any cleaner: test it on a small hidden area first, and rinse it off thoroughly afterward. Residue that dries on the surface can streak, according to Prosoco. Pool decks and lanais with plants around them need extra care. To ask how that is handled, call (904) 664-5908.
Can an old stain come out completely?
Many can, though some take a second pass. Oil can keep darkening after a rinse, and Prosoco notes that drying reveals stains and rinse marks the wet surface hid. So a contractor checks the pavers dry, not wet, before calling a stain gone. If an old spot is still faint, say so when you ask for a free estimate.
What does stain removal on pavers cost in St. Augustine?
No page found lists a stain-only rate for pavers, so this table uses two published pieces. Safe Touch lists $150 to $400 for a driveway or concrete wash, saying it varies with size, oil and rust, and $1.75 to $3.25 per square foot to clean, sand and seal pavers. Spot treatment on a small stain usually sits well below the full job. To price yours, ask for a free estimate.
Wondering about a wider wash? Read about paver cleaning and joint sand, or see the areas served around paver sealing in St. Augustine.
| Job | Published range | Source and what moves it |
|---|---|---|
| Driveway or concrete wash | $150 to $400 | Safe Touch, varies with size, oil and rust |
| Paver clean, sand and seal, 300 sq ft | $525 to $975 | Safe Touch rate of $1.75 to $3.25 per sq ft |
| Paver clean, sand and seal, 600 sq ft | $1,050 to $1,950 | Same rate, applied to a two car driveway |
Figures as of November 2026. Safe Touch gives no stain-only paver price. Stripping an old coat and refilling joint sand are usually extra.
Does sealing keep stains from coming back?
It helps, though it is not a force field. A Florida pressure washing company says sealer can protect against stains, oil and salt, and a St. Augustine installer lists stain protection among sealing's benefits. Belgard says sealer should not go on more than once in three years, so the timing of the coat matters. To ask whether a coat makes sense after treatment, call (904) 664-5908.
What do paver stains look like after removal around St. Augustine?
Questions about paver stain removal in St. Augustine
Is it good to seal pavers in Florida?
It helps with stains. A Florida pressure washing company says sealer can protect against stains, oil and salt, and a St. Augustine installer lists stain protection as a benefit. Belgard, a paver maker, says sealer should go on no more than once in three years, so the timing of the coat matters.
Can concrete pavers be stained?
Yes. Prosoco, a coatings maker, says oil soaks into porous pavers and can keep darkening after a rinse. Rust comes from metal furniture, tools or iron-rich water, and efflorescence is salts rising as moisture dries. Each needs its own cleaner.
What not to use to clean pavers?
Be careful with acids, wire brushes and hard pressure. Prosoco, a coatings maker, says acid cleaners suit some pavers but not natural stone or sealed surfaces, and that vinegar is no universal cleaner. Belgard warns that spray force can expose the aggregate under the surface.
Will Dawn dish soap clean pavers?
It may lift light grime, but it is not a stain treatment. Oil that has soaked in can keep darkening after a rinse, according to Prosoco, and rust and organic stains each need a cleaner matched to them. A contractor sorts that out at the walk-through.
Can I pressure wash patio pavers?
Yes, but gently. Prosoco says too much force can displace joint sand and damage the surface, and Belgard says the spray can expose the aggregate. A contractor chooses the pressure for the paver and refills the joints afterward.
How much does it cost to have pavers cleaned and sealed?
Safe Touch lists $1.75 to $3.25 per square foot to clean, sand and seal in Northeast Florida, and $150 to $400 for a driveway or concrete wash that varies with size, oil and rust. No page found gives a stain-only paver rate, so get a written quote.
Why does my driveway have orange rust streaks in St. Augustine?
Irrigation is a common cause. The University of Florida's Florida-Friendly Landscaping program says most Florida well water is high in iron and leaves rust deposits, and that stains often show up when high-iron water is used for irrigation. Metal furniture and tools also leave rust.
Can an oil stain be taken out of my pavers?
Often, with a degreaser chosen for oil. Prosoco says oil soaks into porous pavers and can keep darkening after a rinse, and Belgard says oil should be dealt with promptly. An old stain may need more than one pass.
Why do my pavers look worse after they dry?
Drying can reveal what the wet surface hid. Prosoco notes that drying shows remaining stains and rinse marks, which is why a contractor checks the surface dry before calling it done.
Will sealing keep stains from coming back?
It helps. A Florida washing company says sealer can protect against stains, oil and salt, and a St. Augustine installer lists stain protection as a benefit. It does not make pavers stain proof, so keep fixing the source, like a leaking sprinkler head.
Does the white film on my pavers count as a stain?
Not exactly. Prosoco says efflorescence is salts moving to the surface as moisture dries, not dirt, and that it can return if moisture keeps moving through. Belgard says to wait at least 30 days after install before sealing so it can be removed.
More paver services in St. Augustine
Stain removal is one of nine services here. Choose the closest match, or call (904) 664-5908 and describe the surface.
Ready to see those stains gone?
Call or send the form. Someone answers within 1 business day, often much sooner.
Free, no obligation